Yayusi S2 User Manual -

You can set two separate alarms (Alarm 1 and Alarm 2).

This guide is based on standard operational instructions for the Yayusi S2 bluetooth speaker (often listed with Model S2/S3). For specific nuances, refer to the printed manual included with your specific unit.

: Long press the Power button for 3 seconds to turn the device on or off. Mode Switch : Press the

: A red light indicates charging; the screen will show 100% when fully charged. Battery Life : It takes about to fully charge and provides 8–12 hours of playback at default volume. device.report Additional Features : Switch to FM mode and long-press the Play/Pause button to automatically search and save stations. TF/Micro SD Card

I should verify if Yayusi S2 is an actual product. A quick search shows that Yayusi might be a brand or model, but without specific info, I'll have to create the content generically. Since it's a manual, it should be practical. I'll proceed under the assumption it's an electronic device, maybe a drone or a smart appliance. yayusi s2 user manual

Check the display to ensure the alarm icon (bell) is visible on the screen. If the icon is missing, the alarm is configured but deactivated. Which mode (Bluetooth, Radio, Clock) is causing trouble? How old is the device?

The Yayusi S2 is a versatile 5-in-1 smart gadget. It combines a Bluetooth speaker, alarm clock, FM radio, LED night light, and hands-free calling into one compact device.

The Yayusi S2 displays the ambient room temperature. You can switch between Celsius (°C) and Fahrenheit (°F):

Press and hold the button while in the alarm screen to enter alarm-setting mode. The hour digits will flash. Adjust them using + and - . You can set two separate alarms (Alarm 1 and Alarm 2)

Long press the Power/Play/Pause button for 3 seconds. Pairing:

Used to enter clock and alarm configuration modes. Quick Start Guide 1. Charging the Device

Connect the other end to a 5V 1A USB wall adapter or a powered computer port.

A: The clock is not saved when the battery is completely drained. Keep the speaker charged periodically to maintain internal clock power. : Long press the Power button for 3

Since physical manuals included with budget smartwatches are often very brief or poorly translated, I have compiled a comprehensive below. This guide covers the standard functions and setup process for the Yayusi S2 series.

Make sure the USB charging cable is plugged into the back of the speaker to act as an antenna. Move the device closer to a window.

: To set the time, the device must often be in "Alarm Setting Mode" (essentially the standby/off state for the speaker function). Long-pressing the SET or Power button (depending on the specific firmware version) causes the digits to flash, allowing you to adjust hours and minutes using the previous/next buttons. Audio and Playback Features