Microwave doppler radar (Motion) & Active Infrared (Presence)

If the Prosecure Opti Combi does not function as expected, consider the following common issues:

Standard wiring for the Prosecure Opti Combi typically follows this color-coded configuration: : Power supply (Ground). Brown (+) : Power supply ( Green (-) : Microwave module output (Activation zone). Yellow (+) : Microwave module output. Grey (-) : Test input. Pink (+) : Test input. Blue (-) : Infrared module output (Safety zone). Red (+) : Infrared module output. LED Status Indicators The sensor's LED provides immediate feedback on its status: Solid Green : Device is ready for operation. Solid Red : Detection is active (motion or presence). Flashing Green : A remote command has been received. Flashing Red : A fault has been detected. Flashing Red/Green : Initializing after power-on. Configuration & Adjustments

Unplug the unit for 10 seconds and restart for a new calibration cycle. 6. Compliance and Technical Data

Product designs, button layouts, and software versions may vary by region and manufacturing date. Always refer to the official printed manual included with your unit. This article is a comprehensive guide but does not replace the original safety instructions.

Use the click-wheel or adjustment screw to position the first infrared line. The safety curtain must be adjusted so that it sits as close to the moving door leaf as possible without hitting it.

The is a high-performance, dual-technology sensor engineered specifically for automatic sliding doors. By combining a microwave radar motion detector for door activation with an active infrared (AIR) safety curtain for threshold protection, it provides full compliance with European safety standards like EN 16005 and DIN 18650.

  • prosecure opti combi manual english
  • Documentation
  • Terms
  • Privacy
  • Security
  • About
  • Contact

Prosecure Opti Combi Manual English [better] -

Microwave doppler radar (Motion) & Active Infrared (Presence)

If the Prosecure Opti Combi does not function as expected, consider the following common issues: prosecure opti combi manual english

Standard wiring for the Prosecure Opti Combi typically follows this color-coded configuration: : Power supply (Ground). Brown (+) : Power supply ( Green (-) : Microwave module output (Activation zone). Yellow (+) : Microwave module output. Grey (-) : Test input. Pink (+) : Test input. Blue (-) : Infrared module output (Safety zone). Red (+) : Infrared module output. LED Status Indicators The sensor's LED provides immediate feedback on its status: Solid Green : Device is ready for operation. Solid Red : Detection is active (motion or presence). Flashing Green : A remote command has been received. Flashing Red : A fault has been detected. Flashing Red/Green : Initializing after power-on. Configuration & Adjustments Grey (-) : Test input

Unplug the unit for 10 seconds and restart for a new calibration cycle. 6. Compliance and Technical Data Red (+) : Infrared module output

Product designs, button layouts, and software versions may vary by region and manufacturing date. Always refer to the official printed manual included with your unit. This article is a comprehensive guide but does not replace the original safety instructions.

Use the click-wheel or adjustment screw to position the first infrared line. The safety curtain must be adjusted so that it sits as close to the moving door leaf as possible without hitting it.

The is a high-performance, dual-technology sensor engineered specifically for automatic sliding doors. By combining a microwave radar motion detector for door activation with an active infrared (AIR) safety curtain for threshold protection, it provides full compliance with European safety standards like EN 16005 and DIN 18650.