Accurate loop and edge detection for better quality control.
What (e.g., wire rod, structural beams, flat sheet) are you running?
belongs to the ID6000 series, which utilizes optical sensors to track the position of hot material. 20–30V DC (standard 24V DC systems).
, which simplifies the initial setup and ensures precise tracking of hot materials without requiring physical contact. Key Useful Features Built-in Alignment Laser:
Danieli Automation offers a high-reliability guarantee on these components, reducing maintenance costs and downtime. 4. Operation and Maintenance Guidelines id6100 danieli manual hot
Check your server today. If you cannot find the "Hot" supplement, schedule a call with your Danieli field service representative immediately. Your next coil depends on it.
and is primarily used to detect the position of hot material (looping) between mill stands. Core Functionality Operating Principle : The unit uses a high-resolution CCD linear-array photo sensor to detect infrared radiation emitted by hot bodies. Primary Purpose : Designed for loop position control
Hot rolling mills subject sensors to dense steam, airborne scale dust, and severe mechanical vibration. Use this matrix to troubleshoot common sensor faults:
The ID6100 operates on optical infrared collection rather than magnetic fields. It evaluates real-time spatial properties of hot steel tracking lines. Optical Filtering and CCD Sensing Accurate loop and edge detection for better quality control
What specific is the sensor showing?
| | Value / Range | | :--- | :--- | | Detection Principle | Infrared Optical Detector | | Detectable Spectrum | 830 to 1000 nm | | Object Temperature | Min. 700°C to 1200°C (1300°F) | | Field of View (Vertical) | 30° / 45° (selectable) | | Field of View (Horizontal) | 0.5° | | Resolution | 0.1° | | Power Supply | 24 Vdc ± 20% | | Power Consumption | 7.2W | | Analog Output (Loop Position) | 0 to 10V (POS) or 4-20mA (IPO) | | Digital Output (Material Presence) | +24V discrete signal via NPN/PNP (30V Max 200mA) | | Test Input | +24V for self-test function | | Operating Temperature | 0 to +50°C (32°F to 122°F) | | Storage Temperature | -5 to +80°C (23°F to 176°F) | | Protection Grade | IP66 | | Enclosure Material | Die-cast aluminum | | Cooling | Integrated fluid circuit (air, water, or other coolants) | | Mounting | Semi-circular support plate for ±30° vertical adjustment | | Weight (excluding connectors) | 1 kg (approx.) | | Product Status | Discontinued by Manufacturer / Obsolete |
Products › Automation › ID6000 Loop detectors ‹ Danieli
: The filtered light focuses directly onto a high-speed CCD linear array photo-sensor. 20–30V DC (standard 24V DC systems)
Products › Automation › ID6000 Loop detectors ‹ Danieli
: The unit includes a built-in self-test function and an alignment laser to ensure the sensor is correctly aimed at the mill line.
Correction: Measure the DC voltage across the power pins under load. If the voltage is stable but the scanner stays unresponsive, swap out the unit. Lifecycle and Sourcing Notes