How To Reset Epson L3250 Using Resetter Adjustment Program ((new)) -

While running the adjustment program resets the internal digital software counter , it does not physically clean the ink pads.

There is no fixed number, but a general recommendation is to physically clean or replace the waste ink pad after . If you notice ink stains on the paper or inside the printer, clean the pad immediately.

Close the program. Right-click the AdjProg.exe file, navigate to properties, change compatibility mode to Windows 7 or 8, and ensure you are launching it by clicking "Run as administrator." how to reset epson l3250 using resetter adjustment program

Before downloading or opening any utility tools, prepare your computer and printer environment to ensure the resetting process completes without errors:

The alternating flashing red lights should now be gone, replaced by a solid green power light. You can click the button in the software once more to verify that the counter has successfully dropped to 0%. Crucial Next Step: Physical Waste Ink Management While running the adjustment program resets the internal

Ensure the USB cable is secure and try a different USB port on your PC.

Click on the button on the right side of the main menu. A long list of technical maintenance utilities will appear. Scroll down to the Maintenance section, highlight Waste ink pad counter , and click OK . 4. Check the Current Counter Value Close the program

A final prompt will appear on the screen stating: "Please turn off the printer." Reach over to your Epson L3250 and press the physical power button to turn it completely off. Click on the computer screen message after the printer shuts down. Wait 10 seconds, then turn your printer back on.