While holding , press the MIN button until the exact minutes match your local time.
While inside the programming menu editing a specific event, press the (Reset/Recall) button to temporarily clear a setting. Pressing it again will restore the previously configured time. 5. Understanding the Override Modes (ON / AUTO / OFF)
If the timer is supposed to be off right now according to your schedule, press the button to cycle to , then press it once more to switch to AUTO (Screen reads: OFF AUTO ).
Press and MIN to set the desired time for the device to turn ON. Press TIMER again to save the ON time and move to "1 OFF" . Setting Program 1 (OFF Time) The display should now show "1 OFF" . chevron digital timer ew-32 user manual
Press the and HOUR buttons simultaneously to activate Random mode. A RND or RANDOM icon will flash on the display.
The manual override button () controls how the timer behaves right now. Understanding this toggle avoids the common issue of programs not triggering.
The EW-32 allows up to 8 separate ON and OFF events. For example: Light ON at 6:00 PM (Event 1), OFF at 11:00 PM (Event 1), Pump ON at 5:00 AM (Event 2), OFF at 7:00 AM (Event 2). While holding , press the MIN button until
Press the button (or MIN/HOUR combination depending on production batch).
Press the button again. The screen will switch to display 1 OFF . Repeat Step 2 and Step 3 to set the exact days and time you want the device to shut down.
Allows you to turn devices on or off without altering the programmed schedule. Press TIMER again to save the ON time and move to "1 OFF"
Turn on the main power. The LCD display should illuminate. 4. Programming the Chevron EW-32
Press the button to exit programming and save your settings. Deleting or Recalling a Program