Failed -remote 39-flashing Lock Flag Is Locked. Please Unlock It First 39-- _verified_ 📢

into a special boot mode (e.g., DFU, recovery, or bootloader) and retry.

This error message indicates that you are trying to write or "flash" software to a partition while your device's is still locked . In most Android-based devices, the bootloader must be explicitly unlocked before it will allow any manual changes to the system files. Phase 1: Enable OEM Unlocking

Confirm your screen switches to Fastboot Mode. Test the connection by typing: fastboot devices Use code with caution. into a special boot mode (e

Proceed with caution. Unlocking the flashing lock flag usually voids warranties and can result in a permanently bricked device (hard brick) if performed incorrectly.

Open a Command Prompt or Terminal window inside your platform-tools folder. Type the following command to verify connection: adb devices Use code with caution. Boot into the bootloader interface: adb reboot bootloader Use code with caution. Step 3: Execute the Unlock Command Phase 1: Enable OEM Unlocking Confirm your screen

Disconnect your phone from the computer and boot it up normally. Navigate to > About Phone .

: Once in the correct mode, try running the standard unlock command. Warning: This will wipe all data on the device. fastboot flashing unlock Note: Some devices may require fastboot oem unlock instead. Unlocking the flashing lock flag usually voids warranties

python mtk.py unlock

Disclaimer: Proceed with caution. Modifying firmware can result in a hard-bricked device if done incorrectly. If you'd like, I can: Provide the Help you find the correct drivers for your computer Walk you through the backup process