?

Rubik's Cube Simulator

Play with the online cube simulator on your computer or on your mobile phone.

Drag the pieces to make a face rotation or outside the cube to rotate the puzzle.

Apply a random scramble or go to full screen with the buttons.

Chrome Cube Lab
➤ Online Solver
×
Error messages will be shown when a cube is not scrambled properly.
Solution:
?

Rubik's Cube Solver

Calculate the solution for a scrambled cube puzzle in only 20 steps.

Set up the scramble pattern, press the Solve button and follow the instructions.

Use the color picker, apply an algorithm or use a random scramble.

Rubiks-Cube-Solver.com
➤ Stopwatch
?

Cube Timer

Measure your solution times on your journey of becoming a speedcuber!

Use your Space button or click the clock to start and stop the cube timer.

With scramble generator and instant statistics calculator.

Ruwix.com
➤ Tutorial

How to Solve the Rubik's Cube?

The beginner's solution guide with images and easy to follow instructions.

Knowing how to solve the Rubik's Cube is an impressive skill, and with a bit of patience, it’s easier to learn than you might think. You'll soon discover that solving it doesn’t require genius—just determination and practice!

In this tutorial we are going to use the easiest layer-by-layer method.

💡
It's advised to watch the attached video tutorial while using this cheat sheet explaining each step.
1

White Edges

Let's start with the white face. Try to form a white plus sign on the top of the cube, making sure that the colors of the side stickers also match the colors of the lateral centers. This step shouldn't be too hard. First, try to do it without reading the examples below, taking the time to familiarize yourself with the puzzle.

white edges correct way

We can easily insert the edge to the top if you move it to the highlighted bottom-front spot first. Depending on where the white sticker is facing do the rotations.

insert first edge
Case A:
White sticker facing down:		 F F
Case B:
White sticker facing  you:		 D R F' R'

Case C:
When the white edge is stuck between two solved edges you can send it to the bottom layer doing this:

L D L'

face rotation lettersI used capital letters to mark the clockwise face rotations: F (front), R (right), L (left), U (up), D (down).

Turns in the opposite direction are marked with an apostrophe. (')

Examples
2

Finish The White Face

solve cube white cornersWhen the white edges are solved we can move on to solve the white corners.

First, place the white corner corresponding to the position marked by the upper arrow into one of the highlighted spots. Next, repeat the algorithm below until the white piece comes to its desired destination.

R' D' R D

This trick sends the piece back and forth between the top and bottom locations, solved white facetwisting the corner in each step. Using this trick you can solve each white corner in less than 6 iterations.

At the end your cube should have a solid white face with the lateral stickers matching the lateral centers.

Examples
3

Center Layer

Turn your cube upside down because we don't need to work with the white face anymore.

We have a trick to insert an edge piece from the top-front position to the middle layer. Do the "Left" or "Right" algorithm depending on which side you have to insert the piece:

how to do center layer

Left:  U' L' U L U F U' F'
Right:  U R U' R' U' F' U F

solved center layerWhen a center layer piece is in its correct position, but oriented incorrectly then use the same algorithm to take it out, inserting another piece to replace it temporarily.

You'll have two solved layers when you finish this stage.
We're almost there.

More...
Ad
4

Yellow Cross

Inspect the top of your cube. You will see either a dot, an L-shape, a line or a yellow cross. Our goal is to form a yellow cross and we have a trick to go from one state to the other:

how to solve the rubiks cube

F R U R' U' F'

Use this algorithm to shift from one shape to the next one.

More...
5

Swap Edges

We have a yellow cross on the top but the edges are not in their final position yet. They need to match the side colors.

swap rubiks cube edges

R U R' U R U U R' U

Use these steps to swap the front and left yellow edges in the top layer.

6

Cycle Corners

Only the yellow corners are left unsolved at this point. Now we are going to put them in their final position and we'll rotate them in the last step.

Use the algorithm below to cycle the pieces in the direction marked with the arrows while the top-right-front piece is standing still.

cycle rubik algorithm
U R U' L' U R' U' L
7

Orient Corners

Everything is positioned, we just have to orient the yellow corners. We use the same algorithm that we used for solving the white corners in the second step:

R' D' R D

This step can be confusing for most people so read the explanation very carefully and do exactly what it says!

rotate pieces rubiks cube solution1. Hold the cube in your hand having an unsolved yellow corner in the highlighted top-right-front position.
2. Repeat the algorithm until this piece is solved.
3. Turn the top layer to bring another unsolved piece in the highlighted position.
4. Repeat R' D' R D until that one is also solved.
5. Do 3 and 4 for any other unsolved yellow corner.

Important!
⚠️ During the process it might seem that you have messed up the whole cube but don't worry because it will come together if you do it correctly, following the instructions.
⚠️ Always complete the whole R' D' R D algorithm, even if you see the yellow sticker pointing up. You still have to make a final D turn.

Examples
+

Video Tutorial

Watch these steps being explained in this video:

CubeSolve.com
➤ Back to top

Thunderdome Sample Pack Jun 2026

Achieving the perfect balance of distortion and clarity in a hardcore kick is a technical nightmare. Using professional samples ensures your tracks have the "weight" required to stand up against professional releases on labels like Masters of Hardcore or Dogfight .

Do not rely on a single kick sample for the entire frequency spectrum. Layer a clean, punchy transient sample (the "tok") with a separate, heavily distorted bass tail. Use a high-pass filter on the tail and a low-pass filter on the transient to prevent phase cancellation, then bus them together through a subtle brickwall limiter. Creative Resampling

Distorted kicks generate unpredictable sub-frequencies. Apply a high-pass filter around 25Hz to 30Hz on your master channel or kick bus. This removes unusable mud and frees up headroom, making your overall master sound significantly louder. Layer Your Transients

To ensure a kick "cuts" through a dense mix, you can use a pitch envelope. Start the pitch very high and drop it back to normal within a few milliseconds to create a sharp "click" at the beginning of the sound. Typical Production Signal Chain thunderdome sample pack

The Hoover (or "What the..." sound) is the most recognizable lead in hardcore history. Derived from the Roland Alpha Juno’s "Whatthe" preset, it is a detuned, sawtooth-heavy drone that feels like a jet engine stalling. A good sample pack will offer these pitched across a keyboard, often distorted or layered with sub-bass.

: The full, uncompressed version has been cited at around 20 GB of content, while smaller "Ultimate Free" versions (roughly 1 GB) are available on platforms like SoundCloud for those wanting a lighter entry point.

Even premium samples require proper integration into your project container to achieve a cohesive mix. Try these expert techniques: Layering Your Kicks Achieving the perfect balance of distortion and clarity

Complex sound design, experimental structures, and gritty atmosphere. 190 – 220+ BPM High-pitched Kicks, Rapid Percussion, Sharp Screeches

The transient click that cuts through the dense mix.

: Dark and dissonant textures that define the "darkcore" subgenre. Layer a clean, punchy transient sample (the "tok")

Ultimate Thunderdome Sample Pack Guide: Crafting the Sound of Hardcore

Take a hoover stab from the pack. Load it into a granulizer (like Omnisphere or Ableton's Granulator II). Stretch it, reverse it, and pitch it down -12 semitones. Resample that. Now you have a texture no one else in the pack has.

Thunderdome tracks frequently feature aggressive, pitched-down hip-hop vocals. They often include dystopian movie quotes or hype-inducing rave chants. These elements give the music its rebellious, counter-culture attitude. What to Look For in a Thunderdome Sample Pack

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.