Niton Xlt 898 User Manual -

Wait up to two minutes for the tube filament to reach temperature equilibrium. Surface coating or scale

If the system displays "Low Battery," replace it. If "System Check Failed" appears, clean the window and retry. 6. Downloading the Full Manual

: Do not bypass the mechanical or proximity safety sensors. Niton Xlt 898 User Manual

Full remote-control operation of the instrument can also be conducted through this PC connection link. 6. Maintenance and Troubleshooting

Connect the Niton XLt 898 to your PC using the specialized serial or USB data cable. Wait up to two minutes for the tube

[Helium Tank/Regulator] ──> [Interior Measurement Head Purge] ──> [Displaces Ambient Air] │ [Light Element X-Rays (Mg, Al, Si, P)] <── [Unimpeded Path to Detector] <────┘

: Data can be transferred to a PC via RS-232 or Bluetooth using the supplied NITON Data Transfer (NDT) software for report generation in Excel or MS Word. XLt Customer Support | Portable Analysis for Material ID clean the window and retry.

Ensure flat placement against the analyzer face plate to prevent X-ray leakage. Step 4: Taking a Measurement

: Certified check-sample used for daily validation and system calibration checking. RS-232 PC Interface Cable : For hardwired data transmission.

Use a pair of clean tweezers to remove the damaged window film.