Remove the center nut, and replace the friction plates and steel plates if worn. 6. Sourcing 162FMJ Parts and Manuals
Real-world experience has provided a valuable list of common issues:
: Standard replacement is recommended to ensure efficient combustion.
Manuals generally divide the engine into specific functional groups for troubleshooting: Service manual part engine For CG-125/150 162fmj Engine Service Manual
Usually ~0.9L to 1.1L depending on if you are doing a simple change or a full teardown.
Place a drain pan beneath it and remove the plug. Be careful, as a spring and a thimble-shaped wire mesh screen will drop out.
To keep your 162FMJ running optimally, follow this maintenance schedule: (600-900 miles) Change (10W-40 or 15W-40 JASO MA) Oil Screen/Filter Every oil change Clean the centrifugal screen (right side) Valve Clearance or at hard starting Adjust valve lash Spark Plug Check gap and clean (0.6–0.7mm) Air Filter , Replace if needed Clean or replace paper element Clutch Cable Lubricate and adjust play Idle Speed Adjust carburetor idle ( 3. Detailed Service Procedures 3.1. Engine Oil Change & Screen Cleaning Remove the center nut, and replace the friction
: Websites like eBay or specialized forums might have sellers offering the manual.
1.5 to 2.0 turns out from fully seated. Tuning the Idle Mixture
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. Manuals generally divide the engine into specific functional
Uses roughly 1100mL of 15W/40-SE or 10W-40 4-stroke engine oil.
Locate the large 24mm hex plug on the lower bottom-left side of the engine crankcase.
Remove the tank and rocker arm cover (top of the cylinder head).
Approximately 11 to 14 horsepower (8.2–10.4 kW) @ 8,500 RPM. Torque: 8 to 12 Nm @ 6,500 RPM.
Remove the center nut, and replace the friction plates and steel plates if worn. 6. Sourcing 162FMJ Parts and Manuals
Real-world experience has provided a valuable list of common issues:
: Standard replacement is recommended to ensure efficient combustion.
Manuals generally divide the engine into specific functional groups for troubleshooting: Service manual part engine For CG-125/150
Usually ~0.9L to 1.1L depending on if you are doing a simple change or a full teardown.
Place a drain pan beneath it and remove the plug. Be careful, as a spring and a thimble-shaped wire mesh screen will drop out.
To keep your 162FMJ running optimally, follow this maintenance schedule: (600-900 miles) Change (10W-40 or 15W-40 JASO MA) Oil Screen/Filter Every oil change Clean the centrifugal screen (right side) Valve Clearance or at hard starting Adjust valve lash Spark Plug Check gap and clean (0.6–0.7mm) Air Filter , Replace if needed Clean or replace paper element Clutch Cable Lubricate and adjust play Idle Speed Adjust carburetor idle ( 3. Detailed Service Procedures 3.1. Engine Oil Change & Screen Cleaning
: Websites like eBay or specialized forums might have sellers offering the manual.
1.5 to 2.0 turns out from fully seated. Tuning the Idle Mixture
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
Uses roughly 1100mL of 15W/40-SE or 10W-40 4-stroke engine oil.
Locate the large 24mm hex plug on the lower bottom-left side of the engine crankcase.
Remove the tank and rocker arm cover (top of the cylinder head).
Approximately 11 to 14 horsepower (8.2–10.4 kW) @ 8,500 RPM. Torque: 8 to 12 Nm @ 6,500 RPM.