Draw the system wiring through the central hole you prepared.
| Code | Meaning | Fix | |------|---------|-----| | E01 | Temp probe short | Replace probe | | E02 | RH sensor stuck | Desiccate for 24 hrs | | E07 | CO2 reading >3000 ppm | Vent room, re-zero | | E14 | Relay 1 welded | Replace relay board | | E99 | Firmware corruption | USB reflash (see Appendix C) | ts1162 installation manual
The TS1162 supports both DIN-rail mounting and panel mounting. DIN-Rail Installation: Tilt the unit slightly backward. Draw the system wiring through the central hole you prepared
Use included bracket. Unit must be vertical, cable glands facing DOWN. Use included bracket
Route the power and data cables through the rear cable entry port of the mounting bracket.
To mount the thermostat:
Observe the front panel indicator lights. A solid green light typically indicates normal power delivery.