Clean the battery terminals with a wire brush to remove corrosion. Step 2: Connect the Charger to the Battery
: Never plug the charger into the wall outlet until all clips are securely attached.
: Regularly check your charger for any signs of wear and tear. Clean the charger's contacts and ensure good ventilation to prevent overheating.
The is a versatile, manual battery charger designed to charge 12V and 24V lead-acid batteries, commonly used in cars, trucks, tractors, and motorcycles. It is a reliable, robust device designed for both amateur and professional use, featuring charging speed adjustments and monitoring gauges. bradex bx60 battery charger manual
Compiled from real-world experiences and technical discussions on owner forums, this resource will show you how to get the most out of your Bradex BX60 while keeping your battery safe.
| Feature | Bradex BX60 | Bradex BX80 | Bradex BX40 | |---------|-------------|-------------|-------------| | Max Charging Current | 6A | 8A | 4A | | Suitable for battery capacity | 10–120Ah | 20–200Ah | 5–80Ah | | Repair/Desulfation mode | Yes | Yes | No | | LCD Display | Yes | No (LED only) | No (LED only) | | Cold Weather mode | Yes | No | Yes | | Best for | Mid-size cars, SUVs | Trucks, large marine | Motorcycles, small cars |
Connect the charger clamp to a solid, unpainted metal part of the vehicle chassis or engine block, away from the battery. Do not connect to the carburetor or fuel lines. Step 3: Connect the Clamps (Battery Removed) If the battery is outside the vehicle: Connect the Positive (RED) clamp to the Positive (+) post. Clean the battery terminals with a wire brush
What (e.g., clicking sound, no power, ammeter not moving) are you experiencing?
Bradex BX60 is a reliable 12V 4A battery charger specifically designed for lead-acid car batteries. Known for its simplicity and long-term durability—with some users reporting units lasting over 25 years—it is an ideal choice for occasional DIY vehicle maintenance. Tayna Batteries Key Features & Specifications Voltage Compatibility : Specifically designed for all 12V lead-acid car batteries. Charging Output : Delivers 4 Amps RMS
The Bradex BX60 uses a taper-charge pattern. As the battery absorbs power, internal resistance rises, causing the ammeter needle to drop. Clean the charger's contacts and ensure good ventilation
to a solid, unpainted metal part of the vehicle chassis or the negative terminal. : Plug the charger into a grounded AC outlet. Monitor the Gauge
Remove the battery from the vehicle if possible, or ensure the vehicle is turned off. Clean the battery terminals to ensure a good connection. Step 2: Connect the Charger
Turn the charger and allow it to pre-charge the battery for 5 to 10 minutes on the MAX charging setting. This stabilizes the battery chemical composition.