Format the microSD card to the file system. Do not use the quick format option; run a full format.
Most KTAG clones are hardware clones of the original Alientech KTAG. The 2.70 update requires that your hardware has a dual-core STM32F205 or F407 . If your clone has an older F103 chip, do not attempt this update .
: Once the software opens, check the protocol list. If the icons are greyed out, it means the software doesn't recognize the firmware or the tokens have "reset" incorrectly. ⚠️ Critical Precautions update ktag clone from 225 to 270
Locate the micro SD card slot on the PCB and carefully eject the old card.
The or symptom you are experiencing if the update failed? Whether you are using Windows 7 or Windows 10 ? Format the microSD card to the file system
The software will automatically initiate a "protocol and family update" for the device. This process can be slow depending on the performance of the device's internal SD card.
If successful, KSuite will recognize the 7.020 hardware and show V2.70 (or 2.80) in the top corner. If the icons are greyed out, it means
No software update can fix bad hardware. If your 2.25 clone works perfectly for your current needs, don’t fix what isn’t broken. Only update if you specifically need 2.70’s new ECU definitions.