Canon G3400 Reset !link! Direct

Press the copy button, then the Black copy button, then the Wi-Fi button.

Released the Power button. The light flashed rapidly and then settled into a solid, peaceful green. The machine was in "Service Mode." The Final Countdown

to allow the electrical charge in the capacitors to dissipate fully. canon g3400 reset

Locate and click on the or Initialize Settings option. Click Reset or Initialize to restore factory defaults. For Mac Users:

The green Power light will flash for a moment and then stay solid green. The screen on your computer may state that "New Hardware Device is Found." This confirms your G3400 is successfully in Service Mode. Step 5b: Use Canon Service Tool v4720 (or Higher) Press the copy button, then the Black copy

Look down at the section, set the value to 0% , and click Set .

If your printer is showing a waste ink counter error (such as Support Code 5B00 or 7 blinking orange lights), you may need to enter Service Mode: the printer but keep it plugged in. Press and hold the Stop button. While holding Stop, press and hold the Power button. The machine was in "Service Mode

Once the green light is stable and the printer is in Service Mode, you can manually reset the counter: