Dust the exterior casing with a dry microfiber cloth. Never spray liquid cleaners or water directly onto the back movement housing.
: Stop pressing the button once the correct time is reached. The clock will automatically exit manual mode and resume normal operation after about of inactivity. TLC Electrical Supplies Manual Signal Reception (Forced Sync)
Do not expose the clock to direct sunlight, extreme heat, or moisture. Replace batteries when the display becomes dim. Clean the unit with a soft, damp cloth. By following this guide, your will provide accurate timekeeping for years.
: Press and release the button quickly to advance the time by one minute at a time. ch-899 chouchin radio controlled clock manual
The clock receives signals (e.g., DCF77 in Europe, MSF in the UK, WWVB in the US) to maintain perfect time, including automatic updates for daylight saving time (DST).
By following the guidelines outlined in this article and referring to the CH-899 Chouchin Radio Controlled Clock manual, you can enjoy accurate and reliable timekeeping, as well as a range of useful features and functions.
Silences the alarm for 5 minutes or illuminates the display backlight. RESET: Restores the clock to factory default settings. Initial Setup and Signal Reception Dust the exterior casing with a dry microfiber cloth
The hands will spin rapidly and stop automatically at a default position—usually 12:00, 4:00, or 8:00. This confirms the internal gears and sensors are calibrated.
The Ultimate Guide to the CH-899 Chouchin Radio Controlled Clock: Manual, Setup, and Troubleshooting
: Use the UP or DOWN arrows to find your time zone. Press SET . The clock will automatically exit manual mode and
Press and hold for 3 seconds. The hands will halt, and the clock will attempt to sync with the atomic signal. [M.SET] (Manual Set) Button
If you set the time manually, the clock will at night (typically between 12:00 AM and 4:00 AM). If successful, it will override your manual setting and correct itself.
Forces the clock to search for the radio signal.
Your clock is designed to receive a radio signal daily to stay accurate. The signal search typically happens at scheduled times, such as 11:00, 12:00, 2:00, 4:00, 9:00, 13:00, and 18:00.