Airbot Supersonics Manual

Attach the or your preferred accessory (crevice nozzle, soft brush) to the end of the pipe.

If you can tell me you're having with your Airbot Supersonics

Insert the aluminum extension tube into the main motor unit's air intake port until you hear a distinct "click."

The LED indicator will flash during charging and turn solid or off when fully charged. 4. Operating Instructions Powering On/Off airbot supersonics manual

Dry the filters completely in a ventilated area for at least 24 hours before reassembling. Do not dry in direct sunlight or using a hair dryer.

Are you trying to determine the difference between the standard models?

Yes, the HEPA filter and plastic filter assembly are washable. Ensure they are completely dry before reinstalling. Attach the or your preferred accessory (crevice nozzle,

Push the motorized floor brush onto the opposite end of the extension tube until it locks.

Upon opening the box, you will find the handheld vacuum motor, battery pack, metal conduction tube, motorized floor brush, crevice tool, soft brush, and the charging dock/wall mount. Assembling the Vacuum:

If you encounter issues, consult this section before contacting support: Possible Cause Low battery Charge the battery. Suction is weak Dust cup full or filters dirty Empty cup and clean/replace filters. Brush roll stops spinning Tangled hair/debris Clean the brush roll. Strange noise Obstruction in tube Check tube and brush for blockages. Battery not charging Loose connection Check the charger connection. 7. Frequently Asked Questions (FAQ) Yes, the HEPA filter and plastic filter assembly

Before your first use, ensure all parts are present and assembled correctly.

Engineered for high-speed airflow to pick up fine dust and large debris. Lightweight Design: Easy to maneuver, even overhead.