: Save the settings and press Start . Once finished (the box turns green), reconnect the drive.
| Tool | Best for | | ------------------------ | --------------------------------------------- | | | Newer USB 3.0 Phison drives | | SP Tool (SMI) | Silicon Motion controllers (not Phison) | | ChipEasy + UFD_MP | Automatic firmware matching | | HDD Low Level Format | Generic, but cannot fix firmware corruption |
: Uses IDBLK_TIMING.dll to store flash memory support data; "patched" versions often include updated versions of this DLL to support more drives. Standard Restoration Procedure phison mpall v3700e patched
MPALL requires the , not the default Windows driver.
Click the button. You will see a 'Setting Type' window. Select both "Basic Setting" and "New Setting" before clicking OK . This will launch the parameter editor, typically called MPParamEdit_F1.exe . This is where the actual configuration is done. : Save the settings and press Start
Patched versions of Phison MPAll V3700E exist because users and technicians need extended functionality or compatibility beyond official releases. While they can solve problems, they carry material risks including data loss, device bricking, and security exposure. Follow strict safety practices, verify compatibility, and prefer official or well-vetted community solutions whenever possible.
Under , choose 2.0 or 3.0 based on the physical port your drive is connected to. Standard Restoration Procedure MPALL requires the , not
Identify the Controller: Use a tool like ChipGenius or Flash Drive Information Extractor to confirm your drive uses a Phison controller (e.g., PS2251-67, PS2251-07).Match the Burner Files: Ensure you have the correct 'BN' (Burner) and 'FF' (Firmware) files specifically for your controller version.Configure the INI: Edit the MPALL_F1_9000.ini file to match your drive's settings.Test Mode: If the drive is not detected, you may need to manually enter "Test Mode" by shorting specific pins on the controller chip (hardware level). Risks and Ethical Considerations Using patched firmware tools can lead to:
MPALL stands for . It is an official internal factory software leaked from Phison electronics. Manufacturers use MPALL during the assembly line process to: Inject the initial controller firmware. Map and isolate bad NAND flash memory sectors. Configure VID (Vendor ID) and PID (Product ID). Format and finalize the USB drive for retail. Why Do You Need the "Patched" Version?
Flashing firmware carries inherent risks. Make sure your computer is connected to a reliable power source and that you do not disturb the USB connection during this process. Launch as an Administrator.