By converting the ZTE F689 into a pure bridge, you disable its routing capabilities. This hands over all networking duties—like IP assignment, firewall security, and Wi-Fi broadcasting—to your dedicated third-party router (such as an ASUS, Netgear, or TP-Link system). Why You Should Switch to Bridge Mode
In exclusive bridge mode, the F689 should give out IP addresses.
Look for the setting labeled or Connection Type . It will currently be set to Route . Change this setting to Bridge (or Bridge Connection ). Service Type: Ensure this remains set to INTERNET . zte f689 bridge mode exclusive
Modifying WAN connections can disconnect your internet if done incorrectly. Always save a backup first. Navigate to or Administration in the top menu. Look for System Management > Configuration File .
Click or Apply . The fiber gateway will now stop routing traffic and pass it directly to the LAN ports. Step 4: Disable DHCP and Wi-Fi on the ZTE F689 By converting the ZTE F689 into a pure
Configuring the ZTE ZXHN F689 in bridge mode requires either administrative access or using advanced configuration techniques to unlock the feature. While ISPs often restrict bridge mode access, the methods described in this guide provide pathways to achieve true bridge mode operation for improved network control and performance.
To prevent the ZTE gateway from conflicting with your new router, you must disable its internal DHCP server and wireless radios. Disable DHCP Go to > LAN > DHCP Server . Uncheck the box next to Enable DHCP Server . Click Apply . Disable Wi-Fi Go to Network > WLAN > WLAN Radio Options . Look for the setting labeled or Connection Type
If your ISP uses , enter the username and password you saved from Step 1.
: Connect a high-end gaming or mesh router to improve Wi-Fi range and performance.
Connect that cable from of the ZTE F689 to the WAN (Internet) Port of your personal router.