Lovato 31 Rgam 12 User Manual 'link'

Manual mode allows technicians to bypass the automated logic to test contactors and capacitor health. Switch to Manual via the button. Use the UP arrow to sequentially force steps ON. Use the DOWN arrow to force steps OFF.

The details how to configure parameters to match the generator's operating characteristics. Programming via Front Panel

Tracks critical engine parameters (like oil pressure and temperature) and alternator functions to ensure safe operation. Voltage Control:

Stores up to 255 events (alarms, starts, etc.) for troubleshooting. lovato 31 rgam 12 user manual

Once you clarify, I’ll be happy to help appropriately.

When the controller detects an anomaly, it shuts down the engine or blocks transfer actions while displaying a fault status. Generator Fails to Start (Cranking Fault)

: Disables the engine. If mains power is present, the load is switched to the mains. This mode is also used to reset active alarms. MAN (Manual) Manual mode allows technicians to bypass the automated

The Lovato 31 RGAM 12 meets global standards, making it suitable for export machinery and UL-listed panels.

However, based on the naming convention, this appears to be a (often used for changeover, motor control, or ammeter/voltmeter selection). The “31” likely refers to the current rating (31A) and “12” to the number of positions/contacts.

The operator has full control over the contactors. Pressing the "Start" button initiates the engine crank cycle manually. Automatic Mode Use the DOWN arrow to force steps OFF

: Disables the unit's control functions and resets active alarms. Technical Specifications Power Supply Supports 12VDC or 24VDC battery systems. Voltage Control

Press and hold the or PRG button for approximately 5 seconds.

for a specific alarm code you're seeing. Lovato RGAM - Software Serial | PDF | Modem - Scribd

Lovato Electric RGAM 12 is a microprocessor-based automatic transfer unit designed to manage and monitor stand-by generator sets