Ensure the scale pan is completely empty and free from vibrations. The indicator screen will flash .
(often on the bottom of the unit or behind a small panel). Press it using a small screwdriver or pen until the display shows Navigate to CAL : Press the button twice until the display changes to . Confirm this selection by pressing the (or Blue) button. Select Weight Units
Calibrating the Avery Berkel L126 digital indicator is a straightforward process once you understand the required steps: placing the unit in calibration mode (usually via an internal DIL switch), performing zero and span calibration using certified test weights, and saving the settings. Regular calibration ensures that your L126 continues to deliver the accurate, reliable performance it was designed for.
To return the scale to active service, you must lock the settings to prevent drift and comply with local weights and measures laws. Power down the scale. avery berkel l126 calibration
The display will prompt for a weight (e.g., "Load 10" ). Gently place your certified 10lb (or equivalent metric) weight onto the center of the platform. Press the Test button again.
If you require official certifications or experience technical issues with your load cells, you can log service inquiries directly through the Avery Berkel Support Portal or consult with field technicians on the Avery Weigh-Tronix Calibration Services Page .
Disclaimer: If the scale cannot be calibrated using these steps, it may require authorized service. Always refer to your specific Avery Berkel L126 manual for technical guidance. Do you have the Ensure the scale pan is completely empty and
Do not use improvised weights (like water jugs or gym weights), as they lack the precision required for Legal-for-Trade scale calibration.
Press the Zero button twice until the display shows "CAL" (Calibration). Confirm your selection by pressing the Test or Store button.
The indicator screen will update to display (or the corresponding numeric value for your specific calibration block). Press it using a small screwdriver or pen
: Place the scale on a flat, level surface away from vibrations or drafts. Certified Weights
: If you use your scale to determine prices for trade, local weights and measures laws apply. After completing a manual calibration, an authorized inspector must place a security wire or holographic sticker seal over the SW1 access port to protect against tampering.